Archives des Black - Freemove la Glisse Électrique pour tous

LIFT/LOWERING KIT

Nicolas ANTON — Wed, 04 Aug 2021 19:58:38 +0000

This Deck Leveling Kit allows you to raise or lower the Rails + Pads assembly by 3 centimeters! In other words, your wheel axle will go down or up by 3 centimeters.

Composed of 2 aluminum brackets (raw or anodized), this kit is easily installed on your Onewheel+/XR once you release the wheel from its axle. A complete explanatory video is available at the bottom of this page.

Raise your deck: the ground clearance increases by 3 centimeters! You can now climb steep slopes without the risk of rubbing the nose on the ground! Ideal to ride off-piste and reach levels of clearance inaccessible until now!
Lower your deck: the ground clearance decreases by 3 centimeters! Ideal for the city and asphalt, this mode lowers your center of gravity making the ride more stable! The use of Fangs can be very useful in case of hard acceleration to slide on the nose!

Another advantage, the fact that your wheel is off-center reduces the space it occupies between the 2 Pads. If you have an off-road tire, it can be inflated to high pressure without rubbing against the Pads!

This kit includes:
– 2 Machined aluminum plates
– 2 Aluminum Counter Plates
– 8 screws needed for assembly

L’article LIFT/LOWERING KIT est apparu en premier sur Freemove la Glisse Électrique pour tous.

SILVERHANDLE

Nicolas ANTON — Wed, 20 Oct 2021 10:45:23 +0000

Made of stainless aluminum, this high quality carrying handle was designed and handcrafted by American Greg DiGenti.
Intelligently designed, handcrafted and ergonomic, it allows you to carry your Onewheel horizontally and reduces efforts considerably!

It takes no more than 10 seconds to install or remove it thanks to its ultra-resistant velcro system and its centering template!

L’article SILVERHANDLE est apparu en premier sur Freemove la Glisse Électrique pour tous.

FANGS BUMPER PINT

Nicolas ANTON — Tue, 13 Jul 2021 18:10:39 +0000

Introducing the Fangs™ for Pint! Discreetly integrated into a complete Bumper that installs in a few moments on your Onewheel Pint, these 32mm wheels greatly limit the sudden deceleration due to a NoseDive and can leave you with a few precious seconds to save the day!

This bumper comes in different colors and fits perfectly with the design of your board. And best of all, it has a hidden carry handle on the nose for your convenience!

L’article FANGS BUMPER PINT est apparu en premier sur Freemove la Glisse Électrique pour tous.

FANGS 3.0 REPLACEMENT WHEELS

Nicolas ANTON — Wed, 30 Mar 2022 14:51:59 +0000

Are the wheels on your Fangs Bumper 3.0 worn out, or do you simply want to change the colour? No problem! Order this specially adapted pair of wheels and start again!

L’article FANGS 3.0 REPLACEMENT WHEELS est apparu en premier sur Freemove la Glisse Électrique pour tous.

VIPER CONCAVE BACKPAD

Nicolas ANTON — Tue, 13 Jul 2021 18:16:26 +0000

The VIPER is the latest evolution of the COBRA pad as its shape is identical!
Equipped with a solid Vicious grip, it is highly elevated and concave, which allows your back foot to be perfectly held during the ride while increasing the engagement of the body forward.

Made of thermoplastic polyurethane, it’s a soft pad that absorbs considerable terrain-related vibrations, making your board feel like it has a light suspension! A new sensation and an incredible pleasure during the ride!

L’article VIPER CONCAVE BACKPAD est apparu en premier sur Freemove la Glisse Électrique pour tous.

COASTER PLATE

Nicolas ANTON — Wed, 30 Mar 2022 15:32:05 +0000

Developed by the American company LandSurf, the Coaster Plate is a 7mm thick polycarbonate plate.

It fits perfectly under your Onewheel Pint or Pint X, whether or not you have installed a Fangs Bumper V2 to protect it from shocks.

Choose a matching or contrasting colour! Note that the Coaster colours match the Fangs Bumpers colours, as well as the original Pint colours.

4 x 45mm Torx screws are provided for mounting

L’article COASTER PLATE est apparu en premier sur Freemove la Glisse Électrique pour tous.

VIPER CONCAVE FRONTPAD EXTENSION

Nicolas ANTON — Wed, 20 Oct 2021 16:37:02 +0000

This soft thermoplastic polyurethane extension allows you to comfortably cradle your front foot while riding! You gain comfort and control in turns while absorbing vibrations!

The VIPER Concave extension is easily installed on the front pad of your Onewheel!

Thanks to the double-sided adhesive template, it can be stuck directly on the original grip of the Pad. You can then cover it with the VICIOUS grip supplied with it or any other COBRA/VIPER compatible High-Traction Grip sold in our store!

This kit includes :
– A FRONT PAD extension
– A double-sided adhesive template
– One Black VICIOUS Grip
⚠️ This product is optimized to be glued to a front pad in good condition. Otherwise, the electronic sensors may not detect your presence immediately.

L’article VIPER CONCAVE FRONTPAD EXTENSION est apparu en premier sur Freemove la Glisse Électrique pour tous.

PLATYPUS BACKPAD

Nicolas ANTON — Tue, 13 Jul 2021 21:59:28 +0000

Developed by the American company Land-Surf, the Platypus rear pad is aptly named because its shape evokes the strange beak of the Australian animal!

Made of soft polyurethane, this unbreakable pad absorbs vibrations and provides support for the foot thanks to its concave shape. Its flared shape increases the contact surface for more comfort during the ride!

It is delivered with a black Vicious grip and stainless steel screws, as well as a mounting key.

L’article PLATYPUS BACKPAD est apparu en premier sur Freemove la Glisse Électrique pour tous.

GRIP ONEWHEEL+XR

Nicolas ANTON — Wed, 20 Oct 2021 16:42:55 +0000

Laser-cut to fit your pads perfectly, these heavy-duty grips will give your OneWheel+XR a new lease on life!

They install in seconds thanks to their powerful adhesive surface.

L’article GRIP ONEWHEEL+XR est apparu en premier sur Freemove la Glisse Électrique pour tous.

FLIGHT DECK GRIP

Nicolas ANTON — Wed, 30 Mar 2022 18:16:15 +0000

Developed by FlightFins, this high quality concave grip ensures a comfortable foot hold while riding!

Easily installed over the original griptape – no need to screw in or remove the griptape.
The concave shape offers exceptional control for tricks, off-piste rides and all other riding styles.
Enjoy maximum comfort with the dual-layer composite design without sacrificing the feel of the board.

⚠️ATTENTION⚠️
The installation of this grip on the Front Pad of your Onewheel equipped with pressure sensors can alter his proper functioning! This installation is still possible but is done under your responsibility!

L’article FLIGHT DECK GRIP est apparu en premier sur Freemove la Glisse Électrique pour tous.