• These rails remain compatible with all accessories sold on our site.
• They allow you to put any tire on and inflate it to high pressure without it rubbing on the pads! They even allow to use again the good old HOOSIER 6.5 Treaded which was perfectly adapted on the Onewheel Original but not at all on the later versions due to a slight shrinking of the space between the pads.

You can choose to have your rails colored by anodizing, a surface treatment that protects and decorates an aluminum part by anodic oxidation. It gives the materials a better resistance to wear, corrosion and heat.

If you want to take advantage of this opportunity to change all your screws and start over, we offer you a 10% discount on the Hardware Kit if you select the “WITH” option in the drop-down menu!

L’article LONGRAILS est apparu en premier sur Freemove la Glisse Électrique pour tous.

TailRails are interchangeable with the original Onewheel+ and Onewheel+XR rails and are compatible with all accessories in our store.
They are delivered with Tail Rail Guards and a BadgerBite Hub Bolt Locker kit ensuring a permanent maximum safety during the ride

If you want to take advantage of this opportunity to change all your screws and start over, we offer you a 10% discount on the Harware Kit if you select the “WITH” option in the drop-down menu!.

L’article TAILRAILS FULL KIT est apparu en premier sur Freemove la Glisse Électrique pour tous.

Performance:

• 8 to 10 miles range
• Compatible with all hardware versions of Onewheel+ XR
• Amazing protection against shocks! This pack can handle jumping landings without any problem
• Much better torque than the original one
• The lightest and most balanced battery on the market for the Onewheel+XR

Technical Specifications:

• 230 WH actual usable capacity
• 45 amps continuous discharge
• The standard charger charges the CBSP in approximately 1.5 hours.
• Fast charger (6 amps) charges the CBSP in approximately 45 minutes.
• The Boardbank BYOB charger (8 amps) charges the CBSP in about 30 minutes!

Install:
No modifications are required! All you need to do for the installation is to place the CBSP Pack on the back of your case towards the wheel. You do not need to modify your case. When you disconnect your original battery, first disconnect the balance connector (26 wire cable), then disconnect the XT60 (yellow connector). When you install your CBSP, plug in the XT60 first, then the balance connector (26 wire cable) [in reverse order].

BE SURE TO CHARGE AT 100% when you receive your battery before riding.

L’article CBSP BATTERY est apparu en premier sur Freemove la Glisse Électrique pour tous.

This battery is assembled by professionals equipped with industrial tools with pure nickel strips, insulated positive cell terminals, multiple layers of insulation including heat resistant Kapton tape, fireproof structural fiber tape and wear resistant PVC packaging. It is wrapped in shock absorbing foam to protect against any kind of impact.
The cells are new and come directly from the manufacturer. They are SAFE tested according to UN 38.3 and have been used in similar applications for years!

This battery works perfectly with the 4209 and previous versions of Onewheel+XR. It is compatible with the 4210 version but may have some connection problems with the application. It is not compatible with 4211 and above versions.

You can find HERE the assembly instructions in English

⚠️ The installation of this battery voids the manufacturer’s warranty and is done under your responsibility.
⚠️ Be sure to charge your battery to 100% before riding.
⚠️ If you want to update your BMS so that it communicates the correct data to your smartphone app, order the BMS FLASH.

• Charging time with the original charger: about 3h15.
• 567 WH of REAL usable capacity.
• 30 amps of continuous discharge.
• 54v nominal, 63v fully charged

L’article CBXR BATTERY est apparu en premier sur Freemove la Glisse Électrique pour tous.

This battery is assembled by professionals equipped with industrial tools with pure nickel strips, insulated positive cell terminals, multiple layers of insulation including heat resistant Kapton tape, fire retardant structural fiber tape and wear resistant PVC packaging. It is wrapped in shock absorbing foam to protect against any kind of impact.
The cells are new and come directly from the manufacturer. They are SAFE tested to UN 38.3 and have been used in similar applications for years!

This kit includes :

• A 14s2p battery
• A mini quick charger specially designed to preserve the cells as much as possible
• A discreet switch to increase safety of use
• A specially calibrated BMS

⚠️ The installation of this battery voids the manufacturer’s warranty and is done under your responsibility.
⚠️ Be sure to charge your battery to 100% before riding.
⚠️ ONLY use included charger when the battery system is installed

• Charging time with the supplied charger: approximately 1 hour and 15 minutes.
• 302.4 WH of TRUE usable capacity.
• 40 amps of continuous discharge.
• 50.4v nominal

L’article CB+ BATTERY est apparu en premier sur Freemove la Glisse Électrique pour tous.

Designed by the American company ChibatterySystems, this 500Wh standalone charging station charges from the mains in 3 hours.

The reinforced anodized aluminum case is compact (22cm x 16,6cm x 5cm) and light (3,2 kg) so you can take it in your backpack to charge your Onewheel in the open country! It has a USB port to also charge your phone or any other similar accessory.

– BoardBank XR: Recharges the Onewheel 1.25 times in fast charge.
– BoardBank PINT: Recharges 3 times the Onewheel in fast charge.

⚠️ Please be sure to select the model (XR or PINT) before registering your order! ⚠️

This charger comes with a European plug provided by us.

L’article BOARDBANK XR/PINT est apparu en premier sur Freemove la Glisse Électrique pour tous.

But be careful! Your BMS (central computer) has not been warned about this sudden change of capacity! The indications of charge and autonomy that it communicates to your smartphone app are therefore false…

We suggest you to update your BMS by calibrating it on the new capacity of your battery. You just have to disassemble it and send it under protected envelope to the following address
FREEMOVE – Quai du Général de Gaulle – 37400 Amboise

We will send it back to you within 15 days maximum and you will only have to plug it back in so that it communicates perfectly with your smartphone app

⚠️ This operation only works with firmware 4209 and earlier on Onewheel+XR
IMPORTANT: IN ORDER TO SET UP YOUR BMS CORRECTLY, IT IS ESSENTIAL TO LEAVE YOUR ONEWHEEL ON CHARGE FOR 12 HOURS SO THAT THE NEW CAPACITY OF YOUR BATTERY IS PROPERLY TAKEN OVER.

L’article FLASH BMS XR est apparu en premier sur Freemove la Glisse Électrique pour tous.

Updated Features:

• Hyper accurate percent readings based off of rider feedback
• Improved resistance to splash
• New T-Taps for easier installation
• Redesigned housing and material
• Silicon wire for flexibility and durability
• Can fit on wheels with previously installed ChiGauges
• About same size as original

For the most accurate reading, view this display when you are dismounted from the board. This display measures your voltage, so while in motion (under load) the percentage will not give as accurate a picture of your battery percent. Not meant for wet riding conditions, we do not recommend riding in them.

L’article GAUGE DISPLAY FOR THE CBXR est apparu en premier sur Freemove la Glisse Électrique pour tous.

Need a fast charge when you are in town? Turn up the power to get the juice you need.
Home for the night? Decrease the power for a slow and healthy charge for your battery. The possibilities are endless!

• 5 charging modes – 2 amps, 4 amps, 5 amps, 6 amps and 8 amps
• Charge target setting – 80%, 90%, 100% (when set to 80 or 90, the charger does not stop, but reduces its output and warns you).
• Active cooling.
• Built for maximum durability.
• Can charge faster than other fast chargers!
• Grounding pin on outlet (safer than without grounding).

⚠️ Plug the charger in on both sides before turning it on. Turn off the charger before unplugging it. Any other method may result in early degradation of the plug due to the charging arc. Using any fast charger on your Onewheel will degrade your battery faster. Keep this in mind when using the fast charge options. ⚠️

• Dimensions: 23cm x 57cm x 9cm
• Weight: 1.25kg
• 110V/220V
• This charger comes with a European plug provided by us.

L’article VARIABLE RAPID CHARGER – ONEWHEEL XR est apparu en premier sur Freemove la Glisse Électrique pour tous.

Composed of 2 aluminum brackets (raw or anodized), this kit is easily installed on your Onewheel+/XR once you release the wheel from its axle. A complete explanatory video is available at the bottom of this page.

• Raise your deck: the ground clearance increases by 3 centimeters! You can now climb steep slopes without the risk of rubbing the nose on the ground! Ideal to ride off-piste and reach levels of clearance inaccessible until now!
• Lower your deck: the ground clearance decreases by 3 centimeters! Ideal for the city and asphalt, this mode lowers your center of gravity making the ride more stable! The use of Fangs can be very useful in case of hard acceleration to slide on the nose!

Another advantage, the fact that your wheel is off-center reduces the space it occupies between the 2 Pads. If you have an off-road tire, it can be inflated to high pressure without rubbing against the Pads!

This kit includes:
– 2 Machined aluminum plates
– 2 Aluminum Counter Plates
– 8 screws needed for assembly

L’article LIFT/LOWERING KIT est apparu en premier sur Freemove la Glisse Électrique pour tous.